Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先，利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。     

Modified Gerchberg–Saxton (G-S) Algorithm and Its Application

The Gerchberg–Saxton (G-S) algorithm is a phase retrieval algorithm that is widely used in beam shaping and optical information processing. However, the G-S algorithm has difficulty obtaining the exact solution after iterating, and an approximate solution is often obtained. In this paper, we propose a series of modified G-S algorithms based on the Fresnel transform domain, including the single-phase retrieval (SPR) algorithm, the double-phase retrieval (DPR) algorithm, and the multiple-phase retrieval (MPR) algorithm. The analysis results show that the convergence of the SPR algorithm is better than that of the G-S algorithm, but the exact solution is not obtained. The DPR and MPR algorithms have good convergence and can obtain exact solutions; that is, the information is recovered losslessly. We discuss the security advantages and verification reliability of the proposed algorithms in image encryption. A multiple-image encryption scheme is proposed, in which n plaintexts can be recovered from n ciphertexts, which greatly improves the efficiency of the system. Finally, the proposed algorithms are compared with the current phase retrieval algorithms, and future applications are discussed. We hope that our research can provide new ideas for the application of the G-S algorithm.     

An Ensemble Kalman Filter Approach Based on Level Set Parameterization for Acoustic Source Identification Using Multiple Frequency Information

In this paper, a reconstruction problem of the spatial dependent acoustic source from multiple frequency data is discussed. Suppose that the source function is supported on a bounded domain and the piecewise constant intensities of the source are known on the support. We characterize unknown domain by the level set technique. And the level set function can be modeled by a Hamilton-Jacobi system. We use the ensemble Kalman filter approach to analyze the system state. This method can avoid to deal with the nonlinearity directly and reduce the computation complexity. In addition, the algorithm can achieve the stable state quickly with the Hamilton-Jacobi system. From some numerical examples, we show these advantages and verify the feasibility and effectiveness.     

单宁酸/两性离子改性油-水分离膜的制备及性能

以不锈钢网为基材, 利用单宁酸对不锈钢网进行表面预处理并功能化接枝两性离子基团, 制备了新型亲水和水下超疏油的单宁酸/两性离子改性油-水分离膜(TA-ZW-SSM). 利用X射线光电子能谱仪(XPS)、 扫描电子显微镜(SEM)及接触角测量仪等表征了其化学结构、 形态和润湿性. 研究结果表明, 两性离子基团通过化学键接枝在单宁酸预处理的不锈钢网表面. 油-水分离实验结果表明, 对于不同类型的油-水混合物, 本文制备的超亲水和水下超疏油特性的TA-ZW-SSM可实现重力驱动的高效油-水分离, 并具有较好的化学稳定性及再循环性.     

A technique for in situ X-ray computed tomography of deformation-induced cavitation in thermoplastics

Deformation-induced cavitation influences the mechanical response of polymeric materials, but acquiring in situ measurements of the spatial evolution of cavities has typically necessitated the use of synchrotron radiation sources. The objective of this study is to develop and demonstrate a method allowing for in situ measurements of deformation-induced cavitation in axisymmetric polymer specimens, using a home-laboratory X-ray computed tomography setup. The method is demonstrated by assessing deformation-induced cavitation of mineral-filled PVC in a repeated loading-unloading experiment. A temporal resolution of about 3 s is obtained by exploiting the axisymmetry of notched round tensile specimens. The evolution of relative density was captured throughout the experiment, revealing an interplay between void nucleation and void growth. Combined with surface deformation measurements obtained by digital image correlation, the present technique yields data suitable for calibration and validation of material models.     

扫描电镜中背散射电子成像功能的应用

简单介绍了扫描电镜背散射电子成像的工作原理及其应用.利用扫描电镜背散射电子成像结合X-射线能谱来研究样品的微区成分变化,从而快速的了解样品的组成和结构特征,为物相的鉴别提供了有效的分析手段.     

Facile synthesis of nitrogen-doped carbon dots for Fe sensing and cellular imaging

A fast and facile approach to synthesize highly nitrogen (N)-doped carbon dots (N-CDs) by microwave-assisted pyrolysis of chitosan, acetic acid and 1,2-ethylenediamine as the carbon source, condensation agent and N-dopant, respectively, is reported. The obtained N-CDs are fully characterized by elemental analysis, transmission electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction pattern, X-ray photoelectron spectroscopy, UV–vis absorption, and photoluminescence spectroscopy. Doping N heteroatoms benefits the generation of N-CDs with stronger fluorescence emission. As the emission of N-CDs is efficiently quenched by Fe³⁺, the as-prepared N-CDs are employed as a highly sensitive and selective probe for Fe³⁺ detection. The detection limit can reach as low as 10 ppb, and the linear range is 0.010–1.8 ppm Fe³⁺. The as-synthesized N-CDs have been successfully applied for cell imaging and detecting Fe³⁺ in biosystem.     

Real‐time electro‐diffusion method to discriminate carbon nanomaterials

We report both the experimental and theoretical insights of differential electro‐diffusion behavior of carbon nanomaterials (e.g. single wall, multiwall carbon nanotubes, and graphene). We thus discriminate one from the other in a soft gel system. The differential mobility of such material depends on their intrinsic properties, both extend and rate of migration bearing the discriminatory signature. The mobility analysis is made by a real time monitoring of the respective bands.     

非均匀流体介质内部散射声场重建的逐层计算方法*

入射声波激励下非均匀流体介质内部散射声场的重建方法对超声层析成像具有重要意义。以往采用矩量法求解,但该方法全域离散形成的复数满秩矩阵规模随着分辨率与计算精度的提高而急剧增大,对算力具有很高的要求,一定程度上限制了其在实际中的应用。为克服上述缺陷,本文以逐层离散、逐层计算为核心思想,以声散射基本公式与近场声全息理论为基础,推导出逐层计算非均匀流体介质内部散射声场的理论公式并给出对应的几何离散模型。为验证该方法的可行性,以矩量法为参照,对同样的介质模型进行介质内部声场重构仿真。结果表明,逐层算法不仅可以有效地重建非均匀流体介质内部散射声场,且大幅度减小了求解规模。